1x4 HDMI Extender

1 to 4 HDMI-Single CAT-HDMI SplitterModel: DK468Instruction:This extender can extend and connect one HD Source to four HD Displays or Projectors by four pieces of cat6/7 at the same time. The extending distance can reach 60m. This extender meets the needs of multi-route and low-cost HD Signal long distance transmission well. FEATURESlOne HDMI input distribute and extend to found Display by four cat6/7 cable.   The extend distance can be up to 60m.l Support 3Dl Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480ilAudio format support-DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3l LED Status Light:the related led light will go bright.l The extend distance can be up to 60m.l Support signal retimingl No loss of qualityl Installs in minutesl TX uses the DC5V/3A power adaptor.l Four RX: each one uses 5V/1A power adaptorSPECIFICATIONS Length of CAT-6 cable between Rx and TX…..................................  up to 60mHDMI Input…......................24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport audio format input....DTS-HD/Dolby-trueHD/LPCM7.1/DTS/AC3/DSDHDMI Output…...................24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport audio format output.............................LPCM7.1/DTS/Dolby-AC3/DSDMax bandwidth……………………….......…….......................................22.5MHzMax baud rate……………........................................................…........6.75GbpsInput Video signal …………..................................................... 0.5~1.5Volts p-pOutput DDC signal ……………………......…………………… 5Volts p-p (TT1L)Input HDMI cable distance..…...................≤15m AWG26 HDMI standard cableOutput HDMI cable distance…….……......≤20m AWG26 HDMI standard cableMax working current(TX)…………………………………………………...2000mAMax working current(RX)…………………………....…………………… ...600mAPower adapter (TX)…...Input:AC (50HZ,Website:http://www.szaikexin.com, 60HZ) 100V-240V; Output: DC5V/3APower adapter(RX).......Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1AOperating Temperature range……................................................  (0 to 40°C)Operating Humidity range…………………...….5 to 90%RH (No Condensation)Dimension (TX)…………………………............................… ....130x75x42(mm)Dimension (RX)………………..................…………… (82X44X22) (mm) X4pcsNet Weight..............................................................................................................1500gInterface Specification:(1) EDID receiver(2) working indicator(3) switch(4)DC5V power input port(5) sender CAT5E/6 lan Output port(6)TX HDMI Input(7) RX HDMI Output(9) receiver cat5e/6 lan connect portOperating and Connecting:1. Connect the HDMI input source to the sender2. Connect one cat5e/6 cable up to 60 meters between sender receiver3. Connect the output of Receive to display4. Connect 5V power supply to the HDMI CAT 60 4 RX
1x4 HDMI Extender